INFINITY™ Splinting Material

$34.00$360.00

Options Quantity
Infinity™ - Solid, 1/8" (3.2 Mm), 18 X 24" (46 X 61 Cm), Case Of 4
CM231
Infinity™ - Solid, 1/8" (3.2 Mm), 18 X 24" (46 X 61 Cm), 1 Sheet
CM231-1
Infinity™ - Solid, 1/8" (3.2 Mm), 24x 36" (61 X 91 Cm), Case Of 2
CM232
Infinity™ - Solid, 1/8" (3.2 Mm), 24x 36" (61 X 91 Cm), 1 Sheet
CM232-1
Infinity™ - 1% Perf, 1/8" (3.2 Mm), 18 X 24" (46 X 61 Cm), 1 Sheet
CM233
Infinity™ - 1% Perf, 1/8" (3.2 Mm), 18 X 24" (46 X 61 Cm), 1 Sheet
CM233-1
Infinity™ - 1% Perf, 1/8" (3.2 Mm), 24 X 36" (61 X 91 Cm), Case Of 2
CM234
Infinity™ - 1% Perf, 1/8" (3.2 Mm), 24 X 36" (61 X 91 Cm), 1 Sheet
CM234-1
Infinity™ - Solid, 3/32" (2.4 Mm), 18 X 24" (46 X 61 Cm), Case Of 4
CM235-4
Infinity™ - Solid, 3/32" (2.4 Mm), 18 X 24" (46 X 61 Cm), 1 Sheet
CM235-2
Infinity™ - Solid, 1/6" (1.6 Mm), 12 X 18" (31 X 46 Cm), Case Of 4
CM237
Infinity™ - Solid, 1/6" (1.6 Mm), 12 X 18" (31 X 46 Cm), 1 Sheet
CM237-1
Infinity™ - 1 % Perf, 1/6" (1.6 Mm), 12 X 18" (31 X 46 Cm), Case Of 4
CM238
Infinity™ - 1 % Perf, 1/6" (1.6 Mm), 12 X 18" (31 X 46 Cm), 1 Sheet
CM238-1
Infinity™ - Thin 1 % Perf, 3/32 X (2.4mm), 12 X 18" (31 X 46 Cm), Case Of 4
CM236
Infinity™ - Thin 1 % Perf, 3/32 X (2.4mm), 12 X 18" (31 X 46 Cm), 1 Sheet
CM236-1
Infinity™ - Thin 1 % Perf, 3/32" (2.4 Mm), 18 X 24" (46 X 61 Cm), Case Of 4
CM236-4
Infinity™ - Thin 1 % Perf, 3/32" (2.4 Mm), 18 X 24" (46 X 61 Cm), 1 Sheet
CM236-2

Canadian therapists have preferred INFINITY’s™ combination of plastic and rubber-like characteristics for more than 20 years. INFINITY™ is a material with the perfect balance between resistance to stretch and drape.

INFINITY’s™ thermoplastic splinting material is an all-around easy to use material conforming where you need it to but does not overstretch. This blend allows for a truly versatile material that can be used for all splinting applications. Great material for those starting to splint, or for the most experienced splinter. Colour: Beige.

INFINITY™ has a special coating on the surfaces to prevent accidental sticking. Permanent bonds can be achieved using a heat gun, scraping the surface or with a bonding solvent.

Features:

• Controlled stretch – makes larger patterns easy to handle.

• Resists fingerprints.

• Intricate conformability, insuring precise fit.

• Sufficient rigidity eliminates need for reinforcement.

• Flexibility – stands up to high-stress applications. (Weight-bearing splints)

• Recommended for all upper and lower extremity splints.

• Static and dynamic splints, splints for spasticity, elbows, knees, hands, fingers and wrist splints. Heating temperature: 70°C – 75°C (160°F – 170°F)

Thickness: 1 /8″ (3.2 mm). Heat time: 1 min. Work Time: 3 – 4 min.
Thickness: 3 /32″ (2.4mm). Heat time: 45 sec. Work Time: 2 – 3 min.
Thickness: 1 /16″ (1.6mm). Heat time: 30 sec. Work Time: 1 min.