NeuroTrac® Pelvitone

$280.00

FOR PROFESSIONALS ONLY

Options Quantity
Pelvitone Continence Device - 2 Channel 2 Leads
VM-ETS200
SKU: N/A Categories: , , ,

Dual channel PelviTone device has all the features of Continence device, plus:
• Advanced multi-phase programmes where treatment is split into time phases with different stimulation parameters;
• Stronger symmetrical stimulation with the reduced Pulse Width : 50 – 330 ?S.
• Three Custom programmes plus 11 Preset Continence programmes.
• Lock mode function to measure the home compliance (mA and time used)
• NeuroTrac™™ VeriProbe – The Vaginal probe for EMG and Electrostimulation.

STIM
• Dual channel: individually isolated circuits.
• Amplitude: 0-90 mA into 500 Ohm load; actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 86 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
• Type: Constant current, maximum output voltage 180 Volts +10 / -30 Volts
• Waveform: Symmetrical, rectangular bi-phasic with zero DC current.
• Selectable pulse width: 50 ?S – 330 ?S [2% accuracy].
• Pulse Rate selection: in the continuous mode 2 – 100 Hz [2% accuracy].
• Time duration of the treatment selectable: 1 minute to 90 minutes.
• Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
• Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
• Ramp up time 0.1 – 9.9 seconds.
• If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.

Physical dimensions: 134 x 69 x 29.7 mm.

Weight: 0.18 KG with battery.

Environmental Conditions for use:
+5 to +40 degrees Centigrade. 0-90% Humidity.

Environmental conditions for storage & transport:
-25 to +70 degrees Centigrade. 0-90% Humidity. https://veritymedical.co.uk/wp-content/uploads/2016/12/FLYER-PelviTone.pdf