NeuroTrac® Pelvitone Pelvic Floor Stimulator

Item #:VM-ETS200

Item #: VM-ETS200

$280.00

NOTE: The Pelvitone does not come with a probe/Sensor. A list of probes/sensors can be purchased here

Have you visited out our Urology Health Store Canada ? Remington Medical has made it more assessable for end-users and patients to shop for everything Pelvic!  Focusing on brands like KEGEL8 Pelvic Toner exclusively available at Urology Health Store Canada!

Come Check it out today!

 

Product Details

PelviTone – The highest quality pelvic floor training device on the physiotherapy / rehabilitation market.  Trusted by hundreds of therapist across Canada for over 15 years!

 

  • Dual channel PelviTone device has all the features of Continence device, plus:
  • Advanced multi-phase programmes where treatment is split into time phases with different stimulation parameters;
  • Stronger symmetrical stimulation with the reduced Pulse Width : 50 – 330
  • Three Custom programmes plus 11 Preset Continence programmes.
  • Lock mode function to measure the home compliance (mA and time used)

NOTE: the Pelvitone does not come with a probe. These can be purchased here

Sizing
Standard Accessories
Technical Specs

Technical Specs 

STIM

  • Dual channel: individually isolated circuits.
  • Amplitude: 0-90 mA into 500 Ohm load; actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 86 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
  • Type: Constant current, maximum output voltage 180 Volts +10 / -30 Volts
  • Waveform: Symmetrical, rectangular bi-phasic with zero DC current.
  • Selectable pulse width: 50 μS – 330 μS [2% accuracy].
  • Pulse Rate selection: in the continuous mode 2 – 100 Hz [2% accuracy].
  • Time duration of the treatment selectable: 1 minute to 90 minutes.
  • Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
  • Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
  • Ramp up time 0.1 – 9.9 seconds.
  • If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.

Physical dimensions: 134 x 69 x 29.7 mm.
Weight: 0.18 KG with battery.

Environmental Conditions for use:
+5 to +40 degrees Centigrade. 0-90% Humidity.

Environmental conditions for storage & transport:
-25 to +70 degrees Centigrade. 0-90% Humidity.

Documents / Videos
FAQ
How does a Neurotrac Pelvitone electronic pelvic toner work?
The Pelvitone electronic pelvic toners utilize neuromuscular electrical stimulation (NMES), which involves sending an electrical pulse or signal into the pelvic floor muscles. This stimulation induces muscle contractions that are sustained as long as the signal remains active. Once the signal ceases, the muscles relax once again. Ordinarily, the brain communicates these electrical signals through the spinal cord to instruct the muscles to move. However, in cases where the muscles are damaged or weak, the message may not effectively transmit or the muscles may not respond appropriately. The Pelvitone device effectively substitutes the brain’s command to activate the muscles, regardless of their strength. By engaging in this response (or exercise), the Pelvitone aids in revitalizing and rebuilding the muscles, encouraging them to regain proper functionality.
How long before I see results using my pelvic floor stimulator?
Every woman is unique, and individual outcomes may differ. When using a Pelvitone unit, we recommend engaging in exercise once or twice daily for a duration of 12 weeks. Consistent daily exercise will gradually restore strength and enhance sensation in your weakened pelvic floor. However, it typically takes around two weeks before noticeable improvements become apparent. Clinical evidence suggests that aside from exercise, other factors also play a role in achieving optimal results with your Pelvitone device.
Is it safe to use a Neurotrac Pelvitone electronic pelvic toner while having an IUD or Mirena coil inserted?
Certainly! You can safely use a Pelvitone electronic pelvic toner even if you have a Mirena coil or any other type of intrauterine device (IUD) inserted. The IUD is placed directly into the uterus through the cervix, so it remains unaffected by the vaginal probe used during toner sessions, which focuses on the first two inches of the vagina. Therefore, there are no concerns or conflicts between using the Pelvitone toner and having an IUD or Mirena coil in place.
Can you useI use my Neurotrac Pelvitone when I have a period?
The decision of whether to use your Pelvitone during your period is entirely up to you. While some women choose to use it during this time, others prefer not to. Interestingly, many women have reported that using a Pelvitone electronic toner during their period can help alleviate period pain and muscle cramps. If you have the Pelvitone device, you have the option to utilize electrode pads on your skin and select from various exercise programs, such as tibial or sacral nerve stimulation. These alternative programs provide additional flexibility and choices to cater to your specific needs.
Which way should I insert the vaginal probe and how far in?
It is important to ensure that the metal part of the probe, which runs along its length, is inserted with the metal parts facing hip-to-hip. This proper orientation guarantees optimal functionality and effectiveness during use.To ensure optimal effectiveness, keep the electrodes in constant contact with the main part of the muscle, allowing them to conduct the electrical pulse continuously – vaginally this is two inches inside the vagina. It is important to avoid direct contact between the electrode part and the sensitive labia area.
Do I need to use lubricant ?
To facilitate smooth insertion and improve probe contact, it is recommended to use a water-based gel, such as Slippery Stuff, on the probe. Applying the gel helps ensure easy insertion and enhances the flow of the electrical pulse for optimal performance. When using a Pelvitone pelvic toner with electrode pads externally, lubricant is not required.
How do I clean my probe?
Prior to initial use, we advise cleaning the probe. To do so, rinse the probe component with water and a mild detergent at a temperature of 50-55°C. Our probes are for single patient use only; please do not share your probe. Please remember to keep the wires dry at all times.
How often can I use a Pelvitone?
Initially, we recommend using your Pelvitone once a day for a duration of 12 weeks. If you wish to use it more frequently, it is important to allow a minimum of 6 hours between each session to prevent excessive fatigue in your pelvic floor muscles. In case you experience muscle fatigue, you can reduce the program time by half and continue exercising once a day or every other day. This allows for proper recovery and prevents overexertion.
Is it safe to use a Pelvitone if I have an implanted pacemaker?
The operation of pacemakers can be influenced by electrical currents. Since Pelvitone employs neuromuscular electrical stimulation (NMES) to induce muscle contractions, its usage is contraindicated unless under medical supervision. It is crucial to seek medical guidance to ensure the safe and appropriate use of Pelvitone devices if you have an implanted pacemaker.

Related Products

Chattanooga Intelect Transport Electrotherapy Device

TheraTouch® CX4 4-Channel Combination System

NeuroTrac® MyoPlus Pro

Hospital Grade Power Cord (110V)

Serving Canadians for Over 40 Years

Have a question?
Scroll to Top